Enhanced biodegradable polyester film degradation in soil by sequential cooperation of yeast-derived esterase and microbial community.

The degradation of biodegradable plastics poses a significant environmental challenge and requires effective solutions. In this study, an esterase derived from a phyllosphere yeast Pseudozyma antarctica (PaE) enhanced the degradation and mineralization of poly(butylene succinate-co-adipate) (PBSA) film in soil. PaE was found to substitute for esterases from initial degraders and activate sequential esterase production from soil microbes. The PBSA film pretreated with PaE (PBSA-E) rapidly diminished and was mineralized in soil until day 55 with high CO2 production. Soil with PBSA-E maintained higher esterase activities with enhancement of microbial abundance, whereas soil with inactivated PaE-treated PBSA film (PBSA-inact E) showed gradual degradation and time-lagged esterase activity increases. The fungal genera Arthrobotrys and Tetracladium, as possible contributors to PBSA-film degradation, increased in abundance in soil with PBSA-inact E but were less abundant in soil with PBSA-E. The dominance of the fungal genus Fusarium and the bacterial genera Arthrobacter and Azotobacter in soil with PBSA-E further supported PBSA degradation. Our study highlights the potential of PaE in addressing concerns associated with biodegradable plastic persistence in agricultural and environmental contexts.

Comparative biodegradation analysis of three compostable polyesters by a marine microbial community.

IMPORTANCE: Biodegradable plastics can be used in applications where the end product cannot be efficiently recycled due to high levels of contaminations, e.g., food or soil. Some of these plastics have a dedicated end of life, such as composting, but their degradation in the marine environment is poorly understood. In this study we showed that marine microbial communities can degrade a range of biodegradable polymers with different physical and chemical properties and use these as a sole carbon source for growth. We have also provided insights into the degradation mechanisms using a combined metagenomic and metaproteomic approach. In addition, we have identified three new enzymes that are capable of degrading both aliphatic polymers and aliphatic-aromatic copolymers, which can be used for biotechnological applications.

Polyhydroxyalkanoates (PHAs) synthesis and degradation by microbes and applications towards a circular economy.

Overusing non-degradable plastics causes a series of environmental issues, inferring a switch to biodegradable plastics. Polyhydroxyalkanoates (PHAs) are promising biodegradable plastics that can be produced by many microbes using various substrates from waste feedstock. However, the cost of PHAs production is higher compared to fossil-based plastics, impeding further industrial production and applications. To provide a guideline for reducing costs, the potential cheap waste feedstock for PHAs production have been summarized in this work. Besides, to increase the competitiveness of PHAs in the mainstream plastics economy, the influencing parameters of PHAs production have been discussed. The PHAs degradation has been reviewed related to the type of bacteria, their metabolic pathways/enzymes, and environmental conditions. Finally, the applications of PHAs in different fields have been presented and discussed to induce comprehension on the practical potentials of PHAs.

Effects of Marine Sand on the Microbial Degradation of Biodegradable Plastics in Seawater and Biofilm Communities that Formed on Plastic Surfaces.

Four types of biodegradable plastics were evaluated for their biodegradability in seawater collected at Ajigaura coast, Japan, in the presence or absence of marine sand. One of the plastics, poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (PHBH), showed a degree of biodegradation in a seawater sample, and the addition of marine sand markedly accelerated its biodegradation. The addition of marine sand did not affect the bacterial composition of the biofilm that formed on PHBH, and the family Rhodobacteraceae, which was predicted to contribute to the degradation of PHBH, was dominant in biofilm communities regardless of the addition of marine sand. Marine sand may serve as a bacterial source, resulting in the accelerated degradation of PHBH.

Biochemical methane potential and active microbial communities during anaerobic digestion of biodegradable plastics at different inoculum-substrate ratios.

The influence of the inoculum-substrate ratio (ISR) on the mesophilic and thermophilic biochemical methane potential test of two biodegradable plastics was evaluated. Poly(lactic acid) (PLA) and polyhydroxybutyrate (PHB) were selected for this study, the first for being recalcitrant to mesophilic anaerobic digestion (AD) and the second, by contrast, for being readily biodegradable. Several ISRs, calculated on the basis of volatile solids (VS), were tested: 1, 2, 2.85, 4, and 10 g(VS of inoculum).g(VS of substrate)-1. A high ISR was associated with an enhanced methane production rate (i.e., biodegradation kinetics). However, the ultimate methane production did not change, except when inhibition was observed. Indeed, applying the lowest ISR to readily biodegradable plastics such as PHB resulted in inhibition of methane production. Based on these experiments, in order to have reproducible degradation kinetics and optimal methane production, an ISR between 2.85 and 4 is recommended for biodegradable plastics. The active microbial communities were analyzed, and the active bacteria differed depending on the plastic digested (PLA versus PHB) and the temperature of the process (mesophilic versus thermophilic). Previously identified PHB degraders (Ilyobacter delafieldii and Enterobacter) were detected in PHB-fed reactors. Thermogutta and Tepidanaerobacter were detected during the thermophilic AD of PLA, and they are probably involved in PLA hydrolysis and lactate conversion, respectively.

Nitrogen fixing bacteria facilitate microbial biodegradation of a bio-based and biodegradable plastic in soils under ambient and future climatic conditions.

We discovered a biological mechanism supporting microbial degradation of bio-based poly(butylene succinate-co-adipate) (PBSA) plastic in soils under ambient and future climates. Here, we show that nitrogen-fixing bacteria facilitate the microbial degradation of PBSA by enhancing fungal abundance, accelerating plastic-degrading enzyme activities, and shaping/interacting with plastic-degrading fungal communities.

Reprogramming Escherichia coli Metabolism for Bioplastics Synthesis from Waste Cooking Oil.

The recycle and reutilization of food wastes is a promising alternative for supporting and facilitating circular economy. However, engineering industrially relevant model organisms to use food wastes as their sole carbon source has remained an outstanding challenge so far. Here, we reprogrammed Escherichia coli metabolism using modular pathway engineering followed by laboratory adaptive evolution to establish a strain that can efficiently utilize waste cooking oil (WCO) as the sole carbon source to produce monomers of bioplastics, namely, medium-chain α,ω-dicarboxylic acids (MCDCAs). First, the biosynthetic pathway of MCDCAs was designed and rewired by modifying the ß-oxidation pathway and introducing an ω-oxidation pathway. Then, metabolic engineering and laboratory adaptive evolution were applied for improving the pathway efficiency of fatty acids utilization. Finally, the engineered strain E. coli AA0306 was able to produce 15.26 g/L MCDCAs with WCO as the sole carbon source. This study provides an economically attractive strategy for biomanufacturing bioplastics from food wastes, which has a great potentiality to be developed as a wide range of enabling biotechnologies for achieving green revolution.

Plastic Degradation by Extremophilic Bacteria.

Intensive exploitation, poor recycling, low repeatable use, and unusual resistance of plastics to environmental and microbiological action result in accumulation of huge waste amounts in terrestrial and marine environments, causing enormous hazard for human and animal life. In the last decades, much scientific interest has been focused on plastic biodegradation. Due to the comparatively short evolutionary period of their appearance in nature, sufficiently effective enzymes for their biodegradation are not available. Plastics are designed for use in conditions typical for human activity, and their physicochemical properties roughly change at extreme environmental parameters like low temperatures, salt, or low or high pH that are typical for the life of extremophilic microorganisms and the activity of their enzymes. This review represents a first attempt to summarize the extraordinarily limited information on biodegradation of conventional synthetic plastics by thermophilic, alkaliphilic, halophilic, and psychrophilic bacteria in natural environments and laboratory conditions. Most of the available data was reported in the last several years and concerns moderate extremophiles. Two main questions are highlighted in it: which extremophilic bacteria and their enzymes are reported to be involved in the degradation of different synthetic plastics, and what could be the impact of extremophiles in future technologies for resolving of pollution problems.

A toxicological perspective of plastic biodegradation by insect larvae.

Larvae of some insect species (Coleoptera and Lepidoptera) can consume and biodegrade synthetic polymers, including polyethylene, polystyrene, polyvinyl chloride, and polypropylene. Multiple chemical (polymer mass loss and shift of the molecular weight, alterations in chemical functionality, formation of biodegraded intermediates, CO2 production), physical (surface hydrophobicity, thermal analysis), and biological approaches (antibiotic treatment, gut dysbiosis, isolation of plastic microbial degraders) have provided evidence for polymer biodegradation in the larva digestive tract. However, the extent and rate of biodegradation largely depend on the physicochemical structure of the polymer as well as the presence of additives. Additionally, toxicology associated with plastic biodegradation has not been investigated. This knowledge gap is critical to understand the gut symbiont-host interaction in the biodegradation process, its viability in the long term, the effects of plastic additives and their metabolites, and the phenotypic traits linked to a plastic-rich diet might be transferred in successive generations. Likewise, plastic-eating larvae represent a unique case study for elucidating the mechanisms of toxic action by micro- and nanoplastics because of the high concentration of plastics these organisms may be intentionally exposed to. This perspective review graphically summarizes the current knowledge on plastic biodegradation by insect larvae and describes the physiological processes (digestive and immune systems) that may be disrupted by micro- and nanoplastics. It also provides an outlook to advance current knowledge on the toxicity assessment of plastic-rich diets and the environmental risks of plastic-containing by-products (e.g., insect manure used as fertilizer).

Haloarchaea as Cell Factories to Produce Bioplastics.

Plastic pollution is a worldwide concern causing the death of animals (mainly aquatic fauna) and environmental deterioration. Plastic recycling is, in most cases, difficult or even impossible. For this reason, new research lines are emerging to identify highly biodegradable bioplastics or plastic formulations that are more environmentally friendly than current ones. In this context, microbes, capable of synthesizing bioplastics, were revealed to be good models to design strategies in which microorganisms can be used as cell factories. Recently, special interest has been paid to haloarchaea due to the capability of some species to produce significant concentrations of polyhydroxyalkanoate (PHA), polyhydroxybutyrate (PHB), and polyhydroxyvalerate (PHV) when growing under a specific nutritional status. The growth of those microorganisms at the pilot or industrial scale offers several advantages compared to that of other microbes that are bioplastic producers. This review summarizes the state of the art of bioplastic production and the most recent findings regarding the production of bioplastics by halophilic microorganisms with special emphasis on haloarchaea. Some protocols to produce/analyze bioplastics are highlighted here to shed light on the potential use of haloarchaea at the industrial scale to produce valuable products, thus minimizing environmental pollution by plastics made from petroleum.

Bioprospecting of gut microflora for plastic biodegradation.

The problem of plastic prevalence and associated pollution has grasped the entire planet drastically, putting all fields of science on the stake seeking remedies to this global havoc. To address this crisis, with a single remediation strategy is often found to be baseless, thereby much interest has been evoked in the development of multidisciplinary approaches - involving physico-chemical and biological strategies to nullify the aftermath of plastic pollution in all possible means. Even amidst, the availability of different approaches, the use of biological methods to combat plastic degradation has gained momentum. The most frequently used plastics appear in wide forms such as polyethylene plastic bags, polypropylene-based bottles, polyvinyl chloride pipes and polystyrene styrene cups. Plastic nicknamed as one of the toughest polymers viz. polycarbonate, acrylonitrile butadiene styrene (ABS) and Polydicyclopentadiene; quite often are called so as they resist degradation in normal environmental strategies. They are often degraded in non-hostile and harsh environments of pH, temperature, radiation etc. However, not always it is possible to create such harsh environments for plastic degradation. In such a scenario, the use of gut microbes that can withstand the harsh atmosphere of gut environment could serve as promising candidates for plastic biodegradation. The current article envisages the various gut microbes of various biological agents and their role in plastic remediation. The current review compiles the techniques available for plastic remediation, the microbial prospects of plastic remediation, its challenges, and possible breakthroughs to effective plastic remediation.

Disruption of protease A and B orthologous genes in the basidiomycetous yeast Pseudozyma antarctica GB-4(0) yields a stable extracellular biodegradable plastic-degrading enzyme.

The yeast Pseudozyma antarctica (currently designated Moesziomyces antarcticus) secretes a xylose-induced biodegradable plastic-degrading enzyme (PaE). To suppress degradation of PaE during production and storage, we targeted the inhibition of proteolytic enzyme activity in P. antarctica. Proteases A and B act as upper regulators in the proteolytic network of the model yeast, Saccharomyces cerevisiae. We searched for orthologous genes encoding proteases A and B in the genome of P. antarctica GB-4(0) based on the predicted amino acid sequences. We found two gene candidates, PaPRO1 and PaPRO2, with conserved catalytically important domains and signal peptides indicative of vacuolar protease function. We then prepared gene-deletion mutants of strain GB-4(0), ΔPaPRO1 and ΔPaPRO2, and evaluated PaE stability in culture by immunoblotting analysis. Both mutants exhibited sufficient production of PaE without degradation fragments, while the parent strain exhibited the degradation fragments. Therefore, we concluded that the protease A and B orthologous genes are related to the degradation of PaE. To produce a large quantity of PaE, we made a PaPRO2 deletion mutant of a PaE-overexpression strain named XG8 by introducing a PaE high-production cassette into the strain GB-4(0). The ΔPaPRO2 mutant of XG8 was able to produce PaE without the degradation fragments during large-scale cultivation in a 3-L jar fermenter for 3 days at 30°C. After terminating the agitation, the PaE activity in the XG8 ΔPaPRO2 mutant culture was maintained for the subsequent 48 h incubation at 25°C regardless of remaining cells, while activity in the XG8 control was reduced to 55.1%. The gene-deleted mutants will be useful for the development of industrial processes of PaE production and storage.

In vitro anti-leukemic assessment and sustained release behaviour of cytarabine loaded biodegradable polymer based nanoparticles.

AIMS: The study aimed to develop, characterize, and evaluate poly (ɛ-caprolactone) (PCL) based nanoparticles for the sustained release behaviour of cytarabine and to investigate the in vitro anti-cancer influence on KG-1 leukemic cell line. MATERIALS AND METHODS: Nanoprecipitation method was used for the preparation of cytarabine loaded PCL nanoparticles. The developed nanoparticles were characterized for physicochemical properties and the anti-leukemic effect on the KG-1 cell line was evaluated. KEY FINDINGS: A total number of five formulations were prepared with size range from 120.5 ± 1.18 to 341.5 ± 3.02, entrapment efficiency (41.31 ± 0.49 to 62.28 ± 0.39%), spherical morphology, negative zeta potentials, considerable particle size distribution, compatibility between the drug and excipients and thermal stability. X-ray diffraction analysis confirmed the successful incorporation of cytarabine in PCL polymer. In vitro drug release in phosphate buffer saline (pH 7.4) showed initial burst release followed by sustained release up to 48 h. The sustained release behaviour efficiently increased the toxicity of cytarabine-loaded PCL nanoparticles to KG-1 (leukemic) and MCF-7 (breast cancer) cell lines in time dependent manner with lower IC50 values than that of drug solution. The flow cytometry study revealed the better apoptotic activity of cytarabine loaded PCL nanoparticle against treated KG-1 cell line. The western blot analysis confirmed the upregulation of cleaved caspase-3 and downregulation of Bcl-2 protein. SIGNIFICANCE: The experimental results suggest that cytarabine loaded PCL nanoparticles is an efficient carrier to prevent the dose associated toxicity while providing sustained release pattern to ensure maximum anti-cancer influence.

Microbiology challenges and opportunities in the circular economy.

Our knowledge and understanding of micro-organisms have led to the development of safe food, clean water, novel foods, antibiotics, vaccines, healthier plants, animals and soils, and more, which feeds into the United Nations Sustainable Development Goals (UN SDGs). The circular economy can contribute to the UN SDGs and micro-organisms are central to circular nutrient cycles. The circular economy as described by the Ellen MacArthur foundation has two halves, i.e. technical and biological. On the technical side, non-biological resources enter manufacturing paths where resource efficiency, renewable energy and design extend the life of materials so that they are more easily reused and recycled. Biological resources exist on the other half of the circular economy. These are used to manufacture products such as bioplastics and paper. The conservation of nature's stocks, resource efficiency and recycling of materials are key facets of the biological half of the circular economy. Microbes play a critical role in both the biological and technical parts of the circular economy. Microbes are key to a functioning circular economy, where natural resources, including biological wastes, are converted by microbes into products of value and use for society, e.g. biogas, bioethanol, bioplastics, building block chemicals and compost for healthy soils. In more recent times, microbes have also been seen as part of the tool kit in the technical side of the circular economy, where microbial enzymes can degrade plastics and microbes can convert those monomers to value-added products.

Production of Polyhydroxyalkanoates (PHA) by Haloferax mediterranei from Food Waste Derived Nutrients for Biodegradable Plastic Applications.

Polyhydroxyalkanoates (PHA) are a family of microbial polyesters that are used as biodegradable plastics in replacement of conventional plastics for various applications. However, the high production cost is the barrier for PHA market expansion. This study aimed to utilize food waste as low-cost feedstock to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) by Haloferax mediterranei. The effects of acetate (Ac), propionate (Pr), butyrate (Bu), and the short-chain carboxylates derived from food waste were examined on the microbial growth and PHBV production. Results showed that a mixture of carboxylates provided a 55% higher PHBV yield than glucose. The food-waste-derived nutrients achieved the yields of 0.41 to 0.54 g PHBV/g Ac from initial loadings of 450 mg/l to 1,800 mg/l Ac of total carboxylates. And the consumption of individual carboxylate varied between different compositions of the carbon source. The present study demonstrates the potential of using food waste as feedstock to produce PHBV by Haloferax mediterranei, which can provide economic benefits to the current PHA industry. Meanwhile, it will also help promote organic waste reduction in landfills and waste management in general.

Biodegradable Nanoparticles: A Recent Approach and Applications.

Biodegradable nanoparticles (NPs) are the novel carriers for the administration of drug molecules. Biodegradable nanoparticles have become popular recently because of their special features such as targeted delivery of drugs, improved bioavailability, and better therapeutic effectiveness to administer the drug at a constant rate. Polymeric NPs are very small-sized polymeric colloidal elements in which a drug of interest may be encapsulated or incorporated in their polymeric network or conjugated or adsorbed on the layer. Various polymers are employed in the manufacturing of nanoparticles, some of the frequently employed polymers are agents, chitosan, cellulose, gelatin, gliadin, polylactic acid, polylactic-co-glycolic acid, and pullulan. Nanoparticles have been progressively explored for the delivery of targeted ARVs to cells of HIV-infected and have performed the prolonged kinetic release. Drug embedded in this system can give better effectiveness, diminished resistance of drugs, reduction in systemic toxicity and symptoms, and also enhanced patient compliance. The present review highlights the frequently employed manufacturing methods for biodegradable nanoparticles, various polymers used, and its application in anti-retroviral therapy. Also, common evaluation parameters to check the purity of nanoparticles, ongoing and recently concluded clinical trials and patents filled by the various researchers, and the future implication of biodegradable NPs in an innovative drug delivery system are described. The biodegradable NPs are promising systems for the administration of a broad variety of drugs including anti-retroviral drugs, and hence biodegradable nanoparticles can be employed in the future for the treatment of several diseases and disorders.

Bioplastic (poly-3-hydroxybutyrate) production by the marine bacterium Pseudodonghicola xiamenensis through date syrup valorization and structural assessment of the biopolymer.

Biobased degradable plastics have received significant attention owing to their potential application as a green alternative to synthetic plastics. A dye-based procedure was used to screen poly-3-hydroxybutyrate (PHB)-producing marine bacteria isolated from the Red Sea, Saudi Arabia. Among the 56 bacterial isolates, Pseudodonghicola xiamenensis, identified using 16S rRNA gene analyses, accumulated the highest amount of PHB. The highest PHB production by P. xiamenensis was achieved after 96 h of incubation at pH 7.5 and 35 °C in the presence of 4% NaCl, and peptone was the preferred nitrogen source. The use of date syrup at 4% (w/v) resulted in a PHB concentration of 15.54 g/L and a PHB yield of 38.85% of the date syrup, with a productivity rate of 0.162 g/L/h, which could substantially improve the production cost. Structural assessment of the bioplastic by Fourier transform infrared spectroscopy and nuclear magnetic resonance spectroscopy revealed the presence of methyl, hydroxyl, methine, methylene, and ester carbonyl groups in the extracted polymer. The derivative products of butanoic acid estimated by gas chromatography-mass spectrometry [butanoic acid, 2-amino-4-(methylseleno), hexanoic acid, 4-methyl-, methyl ester, and hexanedioic acid, monomethyl ester] confirmed the structure of PHB. The present results are the first report on the production of a bioplastic by P. xiamenensis, suggesting that Red Sea habitats are a potential biological reservoir for novel bioplastic-producing bacteria.

The sustainability of microbial bioplastics, production and applications.

Plastic accumulation has destructive environmental impacts, so the world needs eco-friendly plastic alternatives. Within this context, polyhydroxyalkanoates (PHAs) appear to be real alternatives to the chemical plastics because they are biocompatible and biodegradable. Despite its similar properties to common plastics, PHAs use is still hampered by higher production costs. PHAs are produced by high density fed-batch cultivation, activated sludge, microbial consortia and continuous substrate supply, and a major cost associated with their production is the carbon source used for bacterial fermentation. Therefore, novel carbon sources have been studied for PHA production including, macro algae, peanut oil, crude glycerol and whey. PHAs were applied in myriad fields such as wood production, food packaging, 3D painting, cancer detection, treating ulcers as well as several agricultural and therapeutic applications. In this review, current knowledge of methods and novel carbon sources enhance the sustainability and reliability of PHAs in the prospective future.

Fungal community dynamics during degradation of poly(butylene succinate-co-adipate) film in two cultivated soils in Japan.

Fungi play an important role in the degradation of biodegradable plastics (BPs) in soil. However, little is known about their dynamics in the soil during the degradation of BPs. We studied the community dynamics of BP-degrading fungi during poly(butylene succinate-co-adipate) (PBSA) film degradation in two different types of soils using culture-dependent and culture-independent methods. The Fluvisol and the Andosol soils degrade embedded PBSA films at high and low speeds, respectively. The number of PBSA emulsion-degrading fungi that increased in the Fluvisol soil was higher than that in the Andosol soil after embedding with PBSA films. We succeeded in detecting internal transcribed spacer 1 (ITS1) regions those matched that of the fungi by polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) in both soils. Our results suggest that fungal community analyses using PCR-DGGE in combination with BP degraders isolation techniques enables the monitoring of BP films-degrading fungi.

Metabolic engineering for the synthesis of polyesters: A 100-year journey from polyhydroxyalkanoates to non-natural microbial polyesters.

As concerns increase regarding sustainable industries and environmental pollutions caused by the accumulation of non-degradable plastic wastes, bio-based polymers, particularly biodegradable plastics, have attracted considerable attention as potential candidates for solving these problems by substituting petroleum-based plastics. Among these candidates, polyhydroxyalkanoates (PHAs), natural polyesters that are synthesized and accumulated in a range of microorganisms, are considered as promising biopolymers since they have biocompatibility, biodegradability, and material properties similar to those of commodity plastics. Accordingly, substantial efforts have been made to gain a better understanding of mechanisms related to the biosynthesis and properties of PHAs and to develop natural and recombinant microorganisms that can efficiently produce PHAs comprising desired monomers with high titer and productivity for industrial applications. Recent advances in biotechnology, including those related to evolutionary engineering, synthetic biology, and systems biology, can provide efficient and effective tools and strategies that reduce time, labor, and costs to develop microbial platform strains that produce desired chemicals and materials. Adopting these technologies in a systematic manner has enabled microbial fermentative production of non-natural polyesters such as poly(lactate) [PLA], poly(lactate-co-glycolate) [PLGA], and even polyesters consisting of aromatic monomers from renewable biomass-derived carbohydrates, which can be widely used in current chemical industries. In this review, we present an overview of strain development for the production of various important natural PHAs, which will give the reader an insight into the recent advances and provide indicators for the future direction of engineering microorganisms as plastic cell factories. On the basis of our current understanding of PHA biosynthesis systems, we discuss recent advances in the approaches adopted for strain development in the production of non-natural polyesters, notably 2-hydroxycarboxylic acid-containing polymers, with particular reference to systems metabolic engineering strategies.